For commercial and open source software access, go to the Berkeley Lab Marketplace.
Search Results
High Power and High Energy Density Batteries for Electric Vehicles and Aircraft 2020-116
Novel High-Sulfur Utilization Electrolytes for Lithium-Sulfur Batteries 2019-169
Layered/Rock Salt Intergrown Electrodes for Rechargeable Batteries 2018-142
Microporous Polymers for Gas, Liquid and Battery Applications 2018-128-
Low Cost Stabilizer to Improve Lithium-Sulfur Batteries 2016-040
-
Ant-Nest Electrode Structure for Li-S Batteries 2016-004
Method for Scalable Synthesis of Single-Crystal Lithium NMC Cathode Materials 2021-067
High-energy Li-rich Cathodes for Increased Energy Efficiency in Batteries 2021-168-
Electrode Structure Prepared by Tapecasting 2020-105
-
Enabling Porous Ceramic (LLZO) Electrodes for Solid State Batteries through Tapecasting 2020-061, 2020-117
-
Miscible Polymer Blend Electrolytes: A New Material for High-Performance, Safer Lithium and Solid State Batteries 2020-060
High-rate Li-rich Cathode Materials Enabled by Non-topotactic Reactions 2020-146-
Novel Cost-effective Fluorination Method to Synthesize High-Energy Lithium-Ion Battery Cathode Materials 2020-096
Dissolvable Crosslinked Polymer Binder for Battery Electrode Recycling 2020-089
Enhancing Carbon Dioxide Electrolysis Using Novel Nanoparticle Electrocatalysts with Pseudocapacitive Properties 2020-042-
Improvements in Metal-Supported Solid Oxide Cell Durability 2019-081
Fabrication of Architecturally Controlled Electrolyte Frameworks For Solid-State Batteries 2019-177-
Conductive Polymer Binders for Aqueous Processing of Battery Electrodes 2018-087
-
High Temperature Lithium Ion Battery Cells Utilizing Boron Nitride Aerogels and Boron Nitride Nanotubes 2017-020
-
Enhanced Specific Heat and Energy Storage Capacity of Thermal Fluids 2019-006
-
Acoustic Time-of-Flight Analysis of Batteries to Determine State of Charge, Health, and Physical Condition, 2017-025
-
Modular, Adaptable Holders for Physical Analysis of Sensors and Battery Cells, 2018-115
-
High Temperature Li-ion Battery Cells Utilizing Boron Nitride Aerogels and Boron Nitride Nanotubes, 2017-020
-
Solid Oxide Cell Technologies: Metal-Supported Proton-Conducting Solid Oxide Cell, 2018-121, and Improvements in Metal-Supported Solid Oxide Cell Durability, 2019-081
-
High Power Metal-Supported Solid Oxide Fuel Cells (MS-SOFCs) 2017-072
-
Moderate Temperature Hydrogen Storage 2013-065
-
Nanostructured Organic-Inorganic Solid Electrolytes 2018-067
-
Microstructured Ion-conducting Composites 2017-012
-
Solid Perfluoropolyether Electrolytes for Lithium Batteries 2016-018
-
Longer Cycle Life, Lower Cost All-Organic Redox Flow Batteries 2016-126
-
Cerium Hydrogen Redox Flow Batteries 2016-051
-
Redox-Active Supramolecular Binders for Lithium Sulfur Batteries 2016-080
-
Graphene Oxide / Metal Nanocrystal Multilaminates for Safe, Selective Hydrogen Storage 2015-017
-
Using SiO Anodes for High Capacity, High Rate Electrodes for Lithium Ion Batteries 2014-113
-
Improving Electrochemical Energy Storage Performance with Ion- and Size-Selective Membranes () 2015-067
Soluble Redox Mediators for Metal-Sulfur Batteries for Efficient Charge Transfer 2014-148-
Nonflammable Perfluoropolyether-based Electrolytes for Lithium Ion Batteries 2014-074
-
Self-Regulating, Nonflammable Rechargeable Lithium Batteries IB-2628
-
High Energy Density Low Tortuosity Battery Electrodes 2015-110
-
Hybrid Solid Electrolytes for Safe, Reliable All-Solid-State Rechargeable Lithium Batteries 2015-048
-
Ceramic-Metal Composites for Electrodes of Lithium Ion Batteries IB-2253
-
Nanostructured Sulfur Electrodes for Long-Life Lithium Batteries IB-3049
Water-retaining Polymer Membranes for Fuel Cell Applications IB-2416-
Simplified Electrode Formation using Stabilized Lithium Metal Powder (SLMP®) Doping of Lithium Ion Battery Electrodes IB-3241
Overcharge Protection Prevents Exploding Lithium Ion Batteries IB-3263-
Modified Metal Organic Framework (MOF) as a Solid Lithium Electrolyte for Safer Lithium-Ion Batteries IB-3097
-
Membrane-Electrode Structures for Low Cost Molecular Catalysts in Fuel Cells and Other Electrochemical Devices IB-3169
-
Lower Cost, Nanoporous Block Copolymer Battery Separator IB-3024